Equipment: Rotary Transfer High-Volume Machining

Rotary Transfer High-Volume Machining Equipment: Horizontal / Vertical, Multi-Spindle Automatic Lathes, Schutte Euroturn Gildemeister Wickman Iemca Hydromat

	From precision engineering to stampings and castings, Moore Technology can handle your contract manufacturing needs from our conveniently located facilities in Central Indiana.

We offer a variety of machining services.  The following equipment listing highlights our Rotary Transfer High Volume Machining capabilities.

Multi-spindle Automatic Lathes 

3 Schutte SG-18 18mm/6 spindle 1 Euroturn 32mm/6 spindle 4 Euroturn 25mm/6 spindle 6 Euroturn 20mm/6 spindle 3 Gildemeister GM-16 16mm/6 spindle 1 Wickman 67mm/6 spindle 1 Wickman 45mm/6 spindle 1 Wickman 32mm/6 spindle 6 Pietro Cucchi Multi-Automatic Bar Feed Systems 12 Iemca SIR 320 Multi-Automatic Bar Feed Systems

Utilizing lathes from Schutte, Gildemeister, and Euroturn.  All of these machines represent the “State of the Art” in this field. 

Rotary Transfer Machines

2 Hydromat HB 32/45-16 Sixteen Station Rotary Transfer Machine 7 Horizontal Eight Station Rotary Transfer Machines HLR-8 2 Horizontal Sixteen Station Rotary Transfer Machines HLR-16 4 Vertical Eight Station Rotary Transfer Machines VLR-8

Using our Multi-spindle station rotary transfer machines, we can complete complex components from bar stock; or we can chuck previously turned blanks.  Our ability to spread the work over twenty four stations, results in high reliability, accuracy, and very short cycle times. 

Secondary Machines

25 Internal milling and cross drilling machines used for:   Ramping Drilling Broaching

One of our most unique capabilities is our experience of producing our own secondary machines.  These machines perform milling, drilling, ramping, broaching, marking, arc, etc. on already turned blanks. This philosophy allows the expensive Multi-spindle lathes to produce the component in its simplest form in order to maximize output. Then we design and build a low cost secondary machine to complete the part.

Deburring And Material Handling

3 Rotofinish Vibratory finishing machines 1 Barrel Type deburrer 1 Guyson Air Blasting Deburring with “Brass Blasting” capability

Quality Control - ISO 9001 2000

16 SPC Computers with gauges Mitutoyo SPC Network Registered by NQA USA Certificate Number RAB 10471 Currently Pursuing QS9000 Registration

Operations Performed

Polygon milling 60,000 RPM Drilling Thread rolling Thread milling Thread chasing Broaching Ramping Forming Cross-drilling Slotting Crimping Plating

Moore Technology, Inc.  |  8047 Raindance Trail  |  Indianapolis, IN 46239 USA
Phone: 317-862-9185  |  Fax: 317-862-4564  |  Email: info@MooreTechnology.com

Copyright © 2007-2008 Moore Technology, Inc. All Rights Reserved

Web Site Design by DRIVE - Indianapolis, Indiana